Toyota Tundra T-Style Radio Tech Support

The system receives data for the clock from a few different sources which sometimes cause the clock to change times. To fix this issue:

• Go to the Settings
• Look for Android Settings
  • (More Settings at the top of the page, or in SYSTEM at the top right)
• Scroll down to System
• Open Date and Time
• Turn OFF Automatic Date and Time
• Turn OFF Automatic Time Zone
• Set the Time Zone to your local time zone, then set the time properly

On the climate control harness, there is a white plug that says “TO RADIO,” you’ll need to plug that into the back of the radio itself.

The radio may just be set to the wrong climate control setting. Follow this Climate Control Setup Guide, or you can find them under Support > Installation manuals & Bulletins.

Firstly, MAKE SURE the climate control is set properly to “TUNDRA HI W/ Seat Heaters”

If you have the Classic settings Menu (APP Update 4.3 or older)

• Go to Settings
• Icon on the left with two gears
• Enter 9300
• Scroll to the bottom of the page. Turn on Seat Heating & Seat Blowing.
• Save and Reboot at the bottom of the page

If you have the NEW settings Menu (APP Update 4.4 or Newer)

• Go to Settings
• Tap System on the top right
• Go to Setting Guide
• Seat & Steering Wheel
• Turn on Heated Seats & Cooled Seats, press OK, then Save and Reboot at the bottom of the page

Make sure your climate control setting is already set properly. You can find setups for this under Support > Installation manuals & Bulletins.

If the options still are not there:

• Go to Settings
• Open Advanced Settings (Icon with two Gears)
• Enter 9300
• Look for “Change Climate UI” and switch this setting. Usually, turn this OFF.
• Then, turn off the truck and let the radio power off. After 10-15 seconds, restart the vehicle/radio, and your icons should be there.

If this did not work, go through the same process, but try the other Change Climate UI option, Off or On.

This means there is a setting turned on for an aftermarket right/side camera. You can turn this off in settings.

If you have the Classic settings Menu (APP Update 4.3 or older)

• Go to Settings
• Go to Advanced Settings (icon with two gears)
• Enter 9300 and press OK
• Turn “Switch to Right Camera when turn signal is detected” OFF.
• Save and Reboot at the bottom of the page

If you have the NEW settings Menu (APP Update 4.4 or Newer)

• Go to Settings
• Tap System on the top right
• Open “Factory Settings”
• Enter 1660 and press OK
• Go to “Install Set” on the left side of the page
• Turn “Switch to Right Camera when turn signal is detected” OFF.
• Save and Reboot at the bottom of the page

Unfortunately due to the way the Android platform works the system can only have one active application active at a time. So when you are in a phone call the Bluetooth application must be in the front or the call will drop. Where a navigation app can run in the background, a phone call can not.

This is a very common issue. We recommend checking ALL main harness plugs for Bent pins. It is very easy to bend pins during that install when plugging in connections.

Also, on the Main power harness, make sure the Emergency Light plug is connected to the climate control connector’s matching Emergency Light plug.

We recommend checking ALL main harness plugs for Bent pins. It is very easy to bend pins during that install when plugging in connections. If this was not your issue, or you have a JBL audio system that is not turning on, make sure the Climate Control is setup properly, and contact us for further support. It can be many issues.